"I would show you a trick but the taxman stole my cards. What an uncivilized society!"
0CC-FamiTracker Effects Commands
View Raw Firki
This article is written based on version 0.3.14.5.
The following effects are directly carried over from FamiTracker: 0, 1, 2, 3, 4, 7, A, B, C, D, F, G, H (2A03 / FDS), I (2A03 / FDS), J (FDS), P, Q, R, S, V (2A03 / MMC5 / VRC6 / VRC7 / N163), W (DPCM), X, Y, Z (DPCM).
The following effects have been ported from vanilla 0.5.0 beta: H (VRC7 / 5B), I (VRC7 / 5B), V (5B), W (5B).
The following effects have extra meanings in 0CC-FamiTracker:
- 0xy: The x and y parameters can be used in scheme arpeggio sequences. (This is how everything started)
- Fxx: Cancels the current groove.
- I0x (FDS): Disables automatic FM.
- Jxx (FDS): Ineffective if automatic FM is active.
- Sxx: On the triangle channel, disables the length counter and the linear counter.
Oxx: Groove setting.
xx = Groove index
Valid range = 00 - 1F
Note: The tracker ignores indices corresponding to blank grooves; it is undefined behaviour to use blank grooves in exported NSFs.
Lxx: Delayed note release.
xx = Delay amount in ticks
Note: L00 is equivalent to the usual note release (===).
Mxy: Delayed channel volume. Restores existing channel volume on next note.
x = Delay amount in ticks
y = New channel volume
Valid range for x and y = 1 - F
Txy: Delayed transpose.
If x = 0 - 7: Delay x ticks, transpose upwards
If x = 8 - F: Delay (x - 8) ticks, transpose downwards
y = Semitones to transpose
Valid range for y = 0 - F
Note: Affects the echo buffer.
Exx: Length counter setting; enables length counter.
xx: Length counter index: (default 01)
Note: Length counter is retriggered on new notes or when updating the high period register. Speed is twice as fast on the triangle channel.
Applies to: 2A03 Pulse, 2A03 Triangle, 2A03 Noise, MMC5 Pulse
EEx: Configure hardware envelope.
If x = 0: Disable hardware envelopes (default)
If x = 1: Enable hardware decay, looping
If x = 2: Enable length counter
If x = 3: Enable hardware decay, once
Note: When hardware decay is enabled, the channel volume will control the decay rate; 0 is the fastest.
Applies to: 2A03 Pulse, 2A03 Noise, MMC5 Pulse
EEx: Configure hardware envelope.
If x = 0: Disable hardware envelopes (default)
If x = 1 - 3: Enable length counter and linear counter
Applies to: 2A03 Triangle
Sxx: Triangle linear counter setting.
If xx = 80 - FF: Cut notes after (xx - 80) / 240 seconds for all new notes
Applies to: 2A03 Triangle
Exx: FDS hardware volume envelope setting.
If xx = 00 - 3F: Attack envelope, 00 is the fastest
If xx = 40 - 7F: Decay envelope, 40 is the fastest
If xx = E0: Disable hardware volume envelope
Hxx: Automatic FM multiplier setting.
xx - 80 = Frequency multiplier
Valid range for xx = 80 - FF
Ixy: Automatic FM; binds modulation rate to output frequency.
x = Frequency multiplier
y + 1 = Frequency divider
Valid range for x = 1 - F
Valid range for y = 0 - F
Zxx: Automatic FM rate bias.
If xx < 80: Decrease FM rate after multiplication
If xx = 80: Zero bias
If xx > 80: Increase FM rate after multiplication
Zxx: Wave buffer position setting.
If xx = 00 - 7E: Override channel's wave position to xx × 2
If xx = 7F: Return control to N163 instruments
Note: It is undefined behaviour to use a wave position that conflicts with the channel registers. The tracker automatically ignores invalid parameters.
- 0CC-FamiTracker
- List of Effects Commands
Effects Commands
::|CONTENTS
The pattern effects in 0CC-FamiTracker expand upon those found in FamiTracker.This article is written based on version 0.3.14.5.
Existing Effects
The following effects are directly carried over from FamiTracker: 0, 1, 2, 3, 4, 7, A, B, C, D, F, G, H (2A03 / FDS), I (2A03 / FDS), J (FDS), P, Q, R, S, V (2A03 / MMC5 / VRC6 / VRC7 / N163), W (DPCM), X, Y, Z (DPCM).
The following effects have been ported from vanilla 0.5.0 beta: H (VRC7 / 5B), I (VRC7 / 5B), V (5B), W (5B).
The following effects have extra meanings in 0CC-FamiTracker:
- 0xy: The x and y parameters can be used in scheme arpeggio sequences. (This is how everything started)
- Fxx: Cancels the current groove.
- I0x (FDS): Disables automatic FM.
- Jxx (FDS): Ineffective if automatic FM is active.
- Sxx: On the triangle channel, disables the length counter and the linear counter.
Global Effects
Oxx: Groove setting.
xx = Groove index
Valid range = 00 - 1F
Note: The tracker ignores indices corresponding to blank grooves; it is undefined behaviour to use blank grooves in exported NSFs.
General Effects
Lxx: Delayed note release.
xx = Delay amount in ticks
Note: L00 is equivalent to the usual note release (===).
Mxy: Delayed channel volume. Restores existing channel volume on next note.
x = Delay amount in ticks
y = New channel volume
Valid range for x and y = 1 - F
Txy: Delayed transpose.
If x = 0 - 7: Delay x ticks, transpose upwards
If x = 8 - F: Delay (x - 8) ticks, transpose downwards
y = Semitones to transpose
Valid range for y = 0 - F
Note: Affects the echo buffer.
2A03 / MMC5 Effects
Exx: Length counter setting; enables length counter.
xx: Length counter index: (default 01)
xx
+00
+01
+02
+03
+04
+05
+06
+07
+08
+09
+0A
+0B
+0C
+0D
+0E
+0F
+00
10
254
20
2
40
4
80
6
160
8
60
10
14
12
26
14
+10
12
16
24
18
48
20
96
22
192
24
72
26
16
28
32
30
Note: Length counter is retriggered on new notes or when updating the high period register. Speed is twice as fast on the triangle channel.
Applies to: 2A03 Pulse, 2A03 Triangle, 2A03 Noise, MMC5 Pulse
EEx: Configure hardware envelope.
If x = 0: Disable hardware envelopes (default)
If x = 1: Enable hardware decay, looping
If x = 2: Enable length counter
If x = 3: Enable hardware decay, once
Note: When hardware decay is enabled, the channel volume will control the decay rate; 0 is the fastest.
Applies to: 2A03 Pulse, 2A03 Noise, MMC5 Pulse
EEx: Configure hardware envelope.
If x = 0: Disable hardware envelopes (default)
If x = 1 - 3: Enable length counter and linear counter
Applies to: 2A03 Triangle
Sxx: Triangle linear counter setting.
If xx = 80 - FF: Cut notes after (xx - 80) / 240 seconds for all new notes
Applies to: 2A03 Triangle
FDS Effects
Exx: FDS hardware volume envelope setting.
If xx = 00 - 3F: Attack envelope, 00 is the fastest
If xx = 40 - 7F: Decay envelope, 40 is the fastest
If xx = E0: Disable hardware volume envelope
Hxx: Automatic FM multiplier setting.
xx - 80 = Frequency multiplier
Valid range for xx = 80 - FF
Ixy: Automatic FM; binds modulation rate to output frequency.
x = Frequency multiplier
y + 1 = Frequency divider
Valid range for x = 1 - F
Valid range for y = 0 - F
Zxx: Automatic FM rate bias.
If xx < 80: Decrease FM rate after multiplication
If xx = 80: Zero bias
If xx > 80: Increase FM rate after multiplication
N163 Effects
Zxx: Wave buffer position setting.
If xx = 00 - 7E: Override channel's wave position to xx × 2
If xx = 7F: Return control to N163 instruments
Note: It is undefined behaviour to use a wave position that conflicts with the channel registers. The tracker automatically ignores invalid parameters.
See Also
- 0CC-FamiTracker
- List of Effects Commands
C A T E G O R I E S
0CC-FamiTracker Effects Commands · DefleMask Tracker Effects Commands · FamiTracker Effects Commands · FastTrackerII Effects Commands · GoatTracker Effects Commands · ImpulseTracker Effects Commands · Klystrack Effects Commands · List of Effects Commands · List of legal XG patches · List of Trackers · Little Sound Dj Effects Commands · LittleGPTracker Effects Commands · MDX · Microtuning 0CC-FamiTracker · Milkytracker Effects Commands · Professional Music Driver Effects Commands · ReNoise Effects commands · SnevenTracker Effects Commands · Specification of General MIDI and Roland MT-32 patches · SunVox Effects Commands · Tracker Effects Master List · VGM Music Maker Effects Commands · Vortex Tracker II Effects Commands
BotBrs online
